

Product Features 
LYSAGHT TRIMDEK® is our most cost effective roofing and walling profile. It is available in both convex and concave pre-curved sheets, to meet architectural features. 
* Self-drilling installation. Fasteners at the crest of the ribs for roofing, and at the valley of the ribs for walling; 
* Overlapping side ribs are designed to prevent the capillary entry of water; 
* Compatible coated fasteners available to give equivalent service life of the system; 
* The panels manufactured from Clean COLORBOND® pre-painted G550 steel or ZINCALUME® unpainted G550 steel; 
* Appealing architectural appearance and multiple-colour choice; 
Schematic

| 
 Technical Specifications  | ||
| 
 TCT(mm)  | 
 0.47  | 
 0.53  | 
| 
 Coverage (mm)  | 
 760  | 
 975  | 
| 
 Rib Height (mm)  | 
 29  | 
 30  | 
| 
 Maximum Recommended Support Spacing in Non Cyclonic Areas  | ||
| 
 Roof Application  | ||
| 
 * Single Span (mm)  | 
 1000  | 
 1400  | 
| 
 * End Span (mm)  | 
 1200  | 
 1600  | 
| 
 * Internal Span  | 
 1700  | 
 2000  | 
| 
 Wall Application  | ||
| 
 * Single Span (mm)  | 
 1600  | 
 1700  | 
| 
 * End Span (mm)  | 
 1800  | 
 1900  | 
| 
 * Internal Span  | 
 2200  | 
 2300  | 
| 
 
  | ||
| 
 For cyclonic ares data, please contact technical department  | ||
| 
 Minimum Recommended Roof Pitch  | 
 3°(1/20 or 5%)  | |
| 
 Minimum Curved Radius  | 
 500mm  | |
| 
 Coating Mass  | 
 150g/m2  | |
| 
 Yield Strength  | 
 550MPa  | |
| 
 Meets Australian Standard  | 
 AS1397-2001 AS/NZS 2728-2007  | |